919044982032
ISI Mark Certification in Delhi
If you’re a manufacturer, importer, or business owner in Delhi looking for ISI Mark Certification, Star QMS India is your most trusted BIS consultancy partner. We provide end-to-end ISI Mark certification support for both domestic and foreign manufacturers across Delhi and NCR.
What is ISI Mark Certification?
The ISI Mark is India’s most recognized product quality certification: issued by the Bureau of Indian Standards (BIS), a statutory body under the Ministry of Consumer Affairs.
A quick terminology note that trips up a lot of people: ISI Mark and BIS certification are the same thing. “ISI” stands for Indian Standards Institution, the old name for BIS. The mark itself still says “ISI,” but the certifying authority is BIS. You’ll see both terms used interchangeably: they refer to the same license.
When BIS grants an ISI Mark license, it confirms your product meets the relevant Indian Standard (IS code) for safety, quality, and performance. For a growing list of product categories, this isn’t optional. Quality Control Orders (QCOs) issued by the Government of India make ISI certification legally mandatory: meaning you cannot manufacture, import, or sell those products in India without the mark.
As of 2025, over 380 product categories are covered under mandatory BIS/ISI certification.
Is ISI Mark Mandatory? (Products Covered)
For QCO-notified products, selling without the ISI Mark can result in raids, fines, and product seizures. Here’s a quick reference for common categories:
| Product Category | Relevant IS Code | Mandatory? |
|---|---|---|
| Electrical wires & cables | IS 694, IS 1554 | ✅ Yes |
| Steel / TMT bars | IS 1786 | ✅ Yes |
| Cement (OPC, PPC) | IS 269, IS 1489 | ✅ Yes |
| Protective helmets | IS 4151, IS 2925 | ✅ Yes |
| LPG cylinders | IS 3196 | ✅ Yes |
| PVC pipes & fittings | IS 4985, IS 7834 | ✅ Yes |
| Water purifiers | IS 16240 | ✅ Yes |
| Packaged drinking water | IS 14543 | ✅ Yes |
| Automotive components | Various IS codes | ✅ Yes (selected) |
| Pressure cookers | IS 2347 | ✅ Yes |
Note: Products not listed here may still be voluntarily certified under BIS. Voluntary certification builds buyer trust and is often required for government tenders even when not legally mandated.
ISI Certification Process: Step by Step
The BIS ISI certification process follows a structured sequence. Here’s what actually happens at each stage:
Step 1: Identify the applicable Indian Standard (1–3 days) Every product has a specific IS code. Getting this wrong wastes months. We confirm the right standard before anything else.
Step 2: Gap analysis of your manufacturing process (3–7 days) We assess your current setup against BIS requirements: machinery, testing equipment, quality records, and process controls. This tells us exactly what needs to be fixed before applying.
Step 3: Documentation preparation (2–4 weeks) This includes Form V (application), factory layout, process flow chart, machinery list, calibration certificates, quality control records, and raw material test reports. Incomplete documents are the #1 reason applications get delayed.
Step 4: Product testing at a BIS-recognized lab (3–8 weeks) Samples are tested at a NABL-accredited, BIS-recognized laboratory against the IS code parameters. Lab selection matters: turnaround time and cost vary significantly between labs.
Step 5: BIS application submission on ManakOnline (1–3 days) The application, test reports, and all documents are submitted on the official manakonline.in portal along with the applicable fees.
Step 6: BIS factory inspection (4–8 weeks after submission) BIS officers visit your manufacturing unit to verify that your actual process matches what’s in the application. This is where preparation makes or breaks the timeline.
Step 7: Deficiency resolution (if any) (2–6 weeks) BIS may raise queries or flag non-conformities. We manage all correspondence and help you respond quickly to avoid delays.
Step 8: License grant and ISI Mark authorization (2–4 weeks after clearance) Once BIS is satisfied, the license is issued. You can then legally print the ISI Mark on your products along with the license number.
Total estimated timeline: 3–6 months for most product categories.
Domestic vs Foreign Manufacturer: Key Differences
The BIS certification route differs depending on where your factory is located.
| Parameter | Indian Manufacturer | Foreign Manufacturer (FMCS) |
|---|---|---|
| Applicable BIS scheme | Scheme I (ISI Mark) | Foreign Manufacturers’ Certification Scheme (FMCS) |
| Factory inspection | By BIS officers in India | By BIS officers at overseas factory |
| Authorized Indian Representative (AIR) required | ❌ No | ✅ Yes: mandatory |
| Typical timeline | 3–6 months | 6–12 months |
| BIS fee concession for Micro Scale Units | ✅ Yes (80% on marking fee) | ❌ Not applicable |
Foreign manufacturers should plan for a longer timeline: BIS overseas inspections require scheduling and travel coordination that adds months to the process.
Documents Required for ISI Mark Certification
For Indian Manufacturers
- Duly filled Form V application
- Certificate of Incorporation / GST registration
- Factory layout plan and address proof
- Manufacturing process flow chart
- List of machinery and equipment with specifications
- Calibration certificates for testing instruments
- In-house test reports / lab test reports
- Raw material details and supplier test certificates
- Quality control personnel details
- Brand name / trademark declaration (if applicable)
- General undertaking accepting BIS’s Scheme of Inspection & Testing (SIT)
For Foreign Manufacturers (FMCS)
- Foreign company incorporation / registration documents
- Factory address and layout plan
- Manufacturing process flow chart
- Machinery and testing equipment list
- Calibration certificates for test equipment
- Product details with applicable IS code
- Sample labels and product markings
- Test reports from BIS-recognized laboratories
- Authorized Indian Representative (AIR) appointment letter: this is non-negotiable
- Undertaking and BIS-prescribed compliance declarations
ISI Certification Cost in Delhi
BIS certification costs have several components: and the total varies by product, scale, and lab.
BIS fee components:
- Application fee: ₹1,000 (one-time)
- Inspection/audit charges: ₹7,000
- Annual license fee: ₹1,000
- Marking fee: Calculated on production volume (this is usually the largest component)
- Product testing charges: Varies by lab and IS code: this can range from a few thousand to several lakhs depending on the number of parameters
80% BIS fee concession for Micro Scale Units: If your unit is classified as Micro under the MSME definition, you’re eligible for an 80% concession on the minimum marking fee. This is a significant saving that many small manufacturers don’t know to claim.
A word on hidden costs: The testing lab you choose matters more than most people realize. Some labs have 3–4 week turnaround; others take 3–4 months for the same test. Choosing the wrong lab can add months and cost to your certification. We help you select the right BIS-recognized lab for your product.
Consultancy fee depends on the complexity of your product and the scope of support you need. Contact us for a free, transparent quote: no obligation.
Why Choose Star QMS India for ISI Certification in Delhi?
We’re not a pan-India firm operating remotely. Our team is based in Noida, Delhi NCR: which means we can physically visit your factory in Okhla, Wazirpur, Narela, Bawana, or anywhere across the capital for inspection preparation and on-ground support.
What sets us apart:
- 100+ successful certifications across product categories: we know where BIS inspectors look and what they flag
- ISO-certified consultancy: our own quality systems are audited, so we practice what we preach
- Minimal client involvement: we manage documentation, BIS portal submissions, lab coordination, and follow-ups. You focus on manufacturing
- MSME fee concession guidance: we proactively identify if you qualify for the 80% marking fee concession and ensure it’s applied correctly
- Transparent pricing: you get a full cost breakdown upfront. No surprise invoices mid-process
- On-ground factory visit support: our consultants visit your unit before the BIS inspection to run a mock audit and fix gaps
Whether you’re a first-time applicant or renewing an existing license, we’ve handled it before.
Frequently Asked Questions
Q: What is the difference between ISI Mark and BIS certification? They’re the same thing. “ISI” (Indian Standards Institution) was the old name for BIS (Bureau of Indian Standards). The mark on products still reads “ISI,” but the certification is issued by BIS under the BIS Act, 2016. When someone says “get BIS certification,” they mean get the ISI Mark license.
Q: Can I sell my product without ISI Mark if it’s on the mandatory list? No. If your product falls under a Quality Control Order (QCO), manufacturing, importing, or selling it without the ISI Mark is a legal offence under the BIS Act. Penalties include fines and imprisonment. Enforcement agencies conduct regular market surveillance and factory raids.
Q: What happens if the BIS inspection fails? BIS will issue a deficiency report listing the non-conformities found. You’ll have a specified time to rectify them and request a re-inspection. This is common: it doesn’t mean your application is rejected. A well-prepared factory, however, significantly reduces the chance of a failed first inspection.
Q: Is ISI certification mandatory in Delhi? Yes: for all QCO-notified products, the mandate applies uniformly across India, including Delhi. There’s no state-level exemption.
Q: How long does the ISI Mark certification process take? Typically 3–6 months for domestic manufacturers. Foreign manufacturers under FMCS should plan for 6–12 months due to overseas inspection scheduling.
Q: Can Star QMS India visit our Delhi factory? Yes. Our team is Delhi NCR-based and can visit your manufacturing unit: whether it’s in Okhla, Wazirpur, Narela, Bawana, or Greater Noida: for pre-inspection preparation and consultation.
Q: What is the cost of ISI certification in Delhi? BIS fees start from ₹1,000 (application) + ₹7,000 (inspection) + ₹1,000 (annual license) + testing charges + marking fee. The total depends on your product, production volume, and lab costs. Micro Scale Units get an 80% concession on the marking fee. Contact us for a free, product-specific quote.
Get ISI Mark Certification in Indore — Contact Us Today
Take the first step toward BIS/ISI compliance for your business in Indore. Our experts are ready to guide you.
📞 Call / WhatsApp: +91-9044982032 📞 Alternate: +91-7318359050 📧 Email: info.starqms@gmail.com
